StreetFighter Hi Stall Torque Converter Holden Trimatic & Powerglide w/ Anti-Balloon Plate.

TCI 741001 StreetFighter Holden Trimatic & Powerglide Hi Stall Torque Converters

These TCI StreetFighter converters are completely remanufactured with furnace-brazed fins, needle bearings, and a flame-hardened hub.

This StreetFighter Hi Stall converter is designed specifically for the Holden V8 Trimatic and the  '62'-73 Powerglide transmissions. Usually provides 3000 to 3400 Stall behind Small Blocks and 3400 to 3600 Stall behind Big Blocks. Features Anti-Balloon Plate to help with converter issues expanding under full load and pushing against the thrust bearings in the engine. 

StreetFighter converters will give you about a 3,000 to 3,500 rpm stall speed. They're recommended for use on high-compression street/strip engines and higher performance cars and are used on some of the fastest street machines the world over. Plus, some applications are available with an anti-ballooning plate for use on vehicles equipped with nitrous oxide.

Torque Convert Compatability:  Powerglide and Holden 308 V8 Trimatic transmissions

Torque Converter Use: Street/Strip

Stall Speed Rating RPM Range:  3,000-3,600

Torque Converter Bolt Circle (in.):  10.750 in.

Anti-Ballooning Plate:  No

Lockup Compatible:  No

Furnace-Brazed:  Yes

Balanced:  Yes

Mounting Hardware Included:  Yes

Mounting Hardware Type:   7/16-20 bolts

Mounting Hardware Quantity:   3

Torque Converter Stall Note:   Actual stall speed may differ due to engine combination, gear selection, and vehicle weight.

Quantity:  Sold individually.