320 HP Camshaft & Lifter Kit Hydaulic Flat Tappet - Performer Series RV cam, Small Block Chevy 350 SBC

Edelbrock Performer-Plus #2102 is designed for 265-400 Chevy V8 engines from 1957-86 and produce optimum torque from the low-end to the mid-range.

Performer-Plus camshafts should be matched with Performer manifolds for vehicles operating from off-idle to 5500 rpm. The Performer-Plus #2102 is a smooth idling cam for daily drivers, trucks, vans, RVs and 4x4s. You can expect a major improvement in throttle response and torque. In the manifold section you'll find torque graphs showing the power gains from Performer manifolds and Performer-Plus cams. All camshafts include flat tappet lifters (except for cams designed for use with stock roller lifters), assembly lube and instructions. This cam produced 320HP and 382 Ft Lbs of Torque when paired with Performer EPS intake manifold #2701 and Performer cylinder heads #60909. 50-State Legal E.O. #D-215-19 for 1957-86 small-block Chevrolet.

Camshaft specifications:
Intake duration: 204 Degrees - Exhaust duration: 214 Degrees
Intake lift: .420" - Exhaust lift: .442"
Lobe separation: 112 Degree
Intake Center Line: 107 Degree
Vacuum: 14"